Main Features:
- Power supply: 12-24Vdc
- Converter: A/D 24 bit with 4 channel
- Max scale number: 4
- Load cells connection: 4 or 6 wires (with sense)
- Operating modes:
– Digital junction box
– Multi-scale transmitter - Conversion rate: up to 3200 conv./sec
- Selectable sampling rate: up to 400 conv./sec
- Displaying: up to 1.000.000d
- Signal sensitivity: 0,03 µV/d (0,03 µV/e)
- Resolution: 3.000.000 points
- Linearization: up to 8 points
- Connectable load cells: up to 8 350 Ω cells
- BUS: depending on the model (See version chart)
- Serial ports:
– 1 RS232 for configuration from PC with “Dinitools®”
– 1 RS485 Port (Mod. DGT4 / DGT4 AN) - Analog output: 16 bit (DGT4AN Model) choosing between 4-20mA, 0-5Vdc or 0-10Vdc.
- Digital outputs: n. 2 configurable OUTPUTS
- Digital inputs: n. 2 configurable INPUTS
- Certifications:
– OIML R76 (10000e o 3000 + 3000e) / R51 / R61 MID
– UL Listed (upon request)
– EU Type Examination Certificate (45501:2015) - Case: ABS, for Din bar (106 x 90 x 58 mm)
- Calibration:
– Theoretical (mV\V)
– With sample weights
– Remotely by WEB SERVER
– From the keyboard
– From PC with “Dinitools” - Keyboard functions:
– Zeroing
– Tare
– Function mode
– Manual data printing/sending
– On/Stand-by - Program functions:
– Setpoint
– High resolution
– Peak
– Alibi Memory
– Unit of measure conversion - Keyboard: mechanical with 5 digits
- Display: 13mm red LED
Function And Data Available Via Fieldbus
- NET, GROSS and TARE weight
- DIGITAL INPUTS status
- RELAY OUTPUTS status
- SETPOINT setting
- Alibi memory writing and reading (optional)
- Weight status (eg positive, negative, stable, unstable)
– Error conditions (eg overload, underload)
– Calibration - SETUP configuration
- Diagnostics of each converter channel
Brochure: DGT4
